Re: Epoxy live edge w/uneven surface If you want the epoxy thicker in the low spots to make the overall surface flat, make a small dam around them and epoxy those first up to the level of the. Two part poly's are tougher than epoxy finishes? I just want something good and hard that will protect the softer parts of the burl. I see those bartop finishes that are about 1/8".

Canada Epoxy Flooring

I'm trying to find a suitable product for filling holes and cracks in exterior cedar. Researching the , three products were recommended Abatron Liquid Wood Is epoxy doable for a workbench finish??? If so how thick should it be??? Could I get away with just a few MM knowing that it will also act as a leveller for the work surface.. Re: Removing thick resin from tabletop/wood Try the planer. If it doesn't work then ?? not sure but the stuff is probably an epoxie of some type.

Epoxy Education. Epoxy Education, , , , , , , 0, Canada Epoxy Flooring, www.facebook.com, 0 x 0, jpg, I'm looking for a recommendation of what kind of seal i can apply to this live edge redwood buffet table I'm making. I want to finish with an epoxy flood because the wood is so soft and i have. But the epoxy idea sounds like the way to go as mentioned. Someone much more knowledgeable than me (possibly you, since you use the stuff) might comment on the. What epoxy would be best for filling worm holes or checks? I would like to be able to tint the epoxy with a dye depending on the application. Would this work? Any structural epoxy or acrylic resin will hold the rods with a bond that's stronger than the wood. Redhead is one of many good brands with several types of adhesive., 20, epoxy-education, Education Consulting

Epoxy Education.